Features and Benefits

Warranty

The perimeter edge metal components and/or a wind speed-specific requirement may be available in the roof system manufacturer’s full system warranty and provide additional value. Please contact your roof system manufacturer to verify and comply with all requirements of their total system warranty.

Details
  • - ANSI/SPRI/FM-4435 ES-1 Tested to comply with International Building Code
  • - FM Approved for wind uplift protection
  • - Miami-Dade County Approved to comply with the High Velocity Hurricane Zone of the Florida Building Code
  • - Provided in 12'-0" lengths with snap-on cover and pre-punched holes for quicker installation and lower labor costs
  • - Slotted fastening holes allow for thermal movement of the materials and ensure correct fastener placement and spacing
  • - All fasteners, splice plates, and 24 ga. galvanized waterdam with slotted holes are included and will arrive to the job site with the product.
  • - Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Technical Data
  • Cover Materials: 24 ga. or 22 ga. galvanized steel and .040", .050", and .063" aluminum
  • Standard sizes: 5.25", 6.75", 8.25", 9.75", 11.25", and 12.75" for one to six nailer coverage
 
Face Height (in) Nailers Covered
5.25 1
6.75 2
8.25 3
9.75 4
11.25 5
12.75 6

Product Downloads

Wind Calculator

Please note that these calculations are based on U.S. measurements and roofing practices, and may not be sufficient or applicable for use outside of North America.